India - Household Consumer Expenditure, NSS 68th Round, Schedule 1.0, July 2011 - June 2012 (Type 2)

Sample Design

Outline of sample design: A stratified multi-stage design has been adopted for the 68th round survey. The first stage units (FSU) are the 2001 census villages (Panchayat wards in case of Kerala) in the rural sector and Urban Frame Survey (UFS) blocks in the urban sector. The ultimate stage units (USU) are households in both the sectors. In case of large FSUs, one intermediate stage of sampling is the selection of two hamlet-groups (hgs)/ sub-blocks (sbs) from each rural/ urban FSU.

Sampling Frame for First Stage Units: For the rural sector, the list of 2001 census villages (henceforth the term 'village' would include also Panchayat wards for Kerala) constitutes the sampling frame. For the urban sector, the list of UFS blocks (2007-12) is considered as the sampling frame.

Stratification: Within each district of a State/ UT, generally speaking, two basic strata have been formed: i) rural stratum comprising of all rural areas of the district and (ii) urban stratum comprising of all the urban areas of the district. However, within the urban areas of a district, if there are one or more towns with population 10 lakhs or more as per population census 2001 in a district, each of them forms a separate basic stratum and the remaining urban areas of the district are considered as another basic stratum.

Sub-stratification:

Rural sector r: If 'r' be the sample size allocated for a rural stratum, the number of sub-strata formed would be 'r/4'. The villages within a district as per frame were first arranged in ascending order of population. Then sub-strata 1 to 'r/4' have been demarcated in such a way that each sub-stratum comprised a group of villages of the arranged frame and have more or less equal population.

Urban sector: If 'u' be the sample size for an urban stratum, 'u/4' number of sub-strata have been formed. In case u/4 is more than 1, implying formation of 2 or more sub-strata, this is done by first arranging the towns in ascending order of total number of households in the town as per UFS phase 2007-12 and then arranging the IV units of each town and blocks within each IV unit in ascending order of their numbers. From this arranged frame of UFS blocks of all the towns/million plus city of a stratum, 'u/4' number of sub- strata formed in such a way that each sub-stratum has more or less equal number of households as per UFS 2007-12.

Total sample size (FSUs): 12784 FSUs have been allocated for the central sample at all-India level and 14772 FSUs have been allocated for state sample. Statewise allocation of sample FSUs has been given in Appendix Table-1.

Allocation of total sample to States and UTs: The total number of sample FSUs has allocated to the States and UTs in proportion to population as per census 2001 subject to a minimum sample allocation to each State/ UT. While doing so, the resource availability in terms of number of field investigators has been kept in view.

Allocation of State/ UT level sample to rural and urban sectors: State/ UT level sample size has been allocated between two sectors in proportion to population as per census 2001 with double weightage to urban sector. However, if such weighted allocation resulted in too high sample size for the urban sector, the allocation for bigger states like Maharashtra, Tamil Nadu, etc. was restricted to that of the rural sector. A minimum of 16 FSUs (minimum 8 each for rural and urban sector separately) is allocated to each state/ UT.

Allocation to strata/ sub-strata: Within each sector of a State/ UT, the respective sample size has been allocated to the different strata/ sub-strata in proportion to the population as per census 2001. Allocations at stratum level are adjusted to multiples of 4 with a minimum sample size of 4. Allocation for each sub-stratum is 4. Equal number of samples has been allocated among the four sub-rounds.

Selection of FSUs:

For the rural sector, from each stratum/ sub-stratum, required number of sample villages has been selected by probability proportional to size with replacement (PPSWR), size being the population of the village as per Census 2001.

For the urban sector, UFS 2007-12 phase has been used for all towns and cities and FSUs have been selected from each stratum/sub-stratum by using Simple Random Sampling Without Replacement (SRSWOR).

Both rural and urban samples are to be drawn in the form of two independent sub-samples and equal number of samples have been allocated among the four sub rounds.


Selection of hamlet-groups/ sub-blocks - important steps

Criterion for hamlet-group/ sub-block formation: After identification of the boundaries of the FSU, it is first determined whether listing is to be done in the whole sample FSU or not. In case the population of the selected FSU is found to be 1200 or more, it has to be divided into a suitable number (say, D) of 'hamlet-groups' in the rural sector and 'sub-blocks' in the urban sector by more or less equalising the population as stated below.

approximate present population of the sample FSU no. of hg's/sb's to be formed

less than 1200 (no hamlet-groups/sub-blocks) 1
1200 to 1799 3
1800 to 2399 4
2400 to 2999 5
3000 to 3599 6
…………..and so on



For rural areas of Himachal Pradesh, Sikkim, Uttarakhand (except four districts Dehradun (P), Nainital (P), Hardwar and Udham Singh Nagar), Poonch, Rajouri, Udhampur, Doda, Leh (Ladakh), Kargil districts of Jammu and Kashmir and Idukki district of Kerala, the number of hamlet-groups are formed as follows:


approximate present population of the sample village no. of hg's to be formed

less than 600 (no hamlet-groups) 1
600 to 899 3
900 to 1199 4
1200 to 1499 5
.………..and so on



Formation and selection of hamlet-groups/ sub-blocks: In case hamlet-groups/ sub-blocks are formed in the sample FSU, the same is done by more or less equalizing population.


Two hamlet-groups (hg)/ sub-blocks (sb) are selected from a large FSU wherever hamlet-groups/ sub-blocks have been formed in the following manner - one hg/ sb with maximum percentage share of population is always selected and termed as hg/ sb 1; one more hg/ sb is selected from the remaining hg's/ sb's by simple random sampling (SRS) and termed as hg/ sb 2. Listing and selection of the households is done independently in the two selected hamlet-groups/ sub-blocks. The FSUs without hg/ sb formation are treated as sample hg/ sb number 1. It is to be noted that if more than one hg/ sb have same maximum percentage share of population, the one among them which is listed first in block 4.2 of schedule 0.0 is treated as hg/ sb 1.

Selection of households: From each SSS the sample households for each of the schedules are selected by SRSWOR. If a household is selected for more than one schedule, only one schedule is canvassed in that household in the priority order of Schedule 1.0 (Type 1), Schedule 1.0 (Type 2) and Schedule 10 and in that case the household would be replaced for the other schedule. If a household is selected for Schedule 1.0 (Type 1) it is not selected for Schedule 1.0 (Type 2) or Schedule 10. Similarly, if a household is not selected for Schedule 1.0 (Type 1) but selected for Schedule 1.0 (Type 2) it is not selected for Schedule 10.

There was no deviation from the original sampling design.